We do the dismantling. Paid upfront, freight on us, and we never ask you to test anything.
Electrical Bus Plug Buyers logo Electrical Bus Plug BuyersWe cut it out, crate it and pay upfront
  1. Home
  2. Locations
  3. Wisconsin
  4. Rice Lake

Rice Lake, WI · the Upper Midwest

Sell Your Bus Plugs in Rice Lake, WI

We cut it out, crate it and haul it away. You are paid before the truck leaves.

  • Paid before removal
  • No testing required
  • Dismantling and rigging on us
  • Freight always covered
Rows of used bus plugs and fusible switches staged in a storage unit
50States Covered
30A - 5000ARatings Purchased
Same DayTypical Offer Turnaround
$0Cost to the Seller

Request a Quote

We buy bus plugs, busway and bus duct in Rice Lake, WI and throughout Wisconsin. There is no obligation.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

Why Sellers Choose Us

What a Rice Lake teardown involves on your end

01You Are Paid Before It Moves

Funds change hands before a single section leaves your property. There is no consignment and no waiting on a downstream resale.

02We Do The Dismantling

Our own crew takes the run down. You are not sourcing riggers, renting lifts or chasing a carrier who has never handled busway before.

03No Testing, Ever

You are never asked to test, megger or certify anything. We grade from physical condition and the nameplate. That is the entire process.

04Mixed Lots Are Welcome

Fusible plugs, breaker units, bus duct, tap boxes, panelboards and starters all on one job is the normal case rather than the exception.

The Rice Lake Market

An idle busway run in a Rice Lake facility costs you nothing to keep and earns you nothing either. We buy it and remove it. Wisconsin sellers get the same terms as anywhere else we operate: paid first, dismantling and freight on us. We will work around your shutdown window, your demolition sequence or your landlord's access hours. The schedule is built to suit you.

Every rating and every manufacturer is in scope. What we see most often in Rice Lake is legacy Westinghouse plugs from a run nobody makes parts for and mixed pallets of fusible switches from a mill teardown. Across Wisconsin we also buy Square D I-Line fusible plugs in 100 and 200 amp frames, aluminum feeder busway from a service entrance run and an entire overhead run with elbows, tees and end closures.

Who We Buy From

Our sellers here are typically electrical contractors closing out a retrofit, demolition contractors who would rather not scrap good gear, food processing and cold storage plants. We also buy from mining and aggregate operations and steel mills and metal fabrication shops.

Most sales trace back to one of a few situations:

  • An acquisition brought a storeroom full of units that fit nothing the new owner operates.
  • Year-end asset review made it obvious the gear was dead capital sitting on the books.
  • The facility is being demolished and the electrical gear has to be out before the excavators arrive.
  • Insurance replaced a fire damaged run and the displaced material has to move off site.

Removal and Freight in Rice Lake

We stage trucks and lift equipment near Milwaukee and dispatch into Rice Lake as projects are scheduled. If the run is thirty feet up over live equipment, tell us and we will plan the lift accordingly.

The equipment is valued on its own merits. The cost of getting it out of Rice Lake — the crew, the lifts, the rigging and the freight — is absorbed on our side. Sellers who already hold a scrap quote often find the difference substantial, because a scrap figure pays metal weight minus processing and ignores entirely what a working plug is worth to a plant that cannot buy a new one.

What Comes Out of Wisconsin Facilities

Bus Duct & Busway Runs

Straight lengths, elbows, tees, end boxes and the whole overhead run, cut out and removed by our own crew.

How we buy bus duct runs →

Circuit Breaker Plug-In Units

Plug-in units with a molded case breaker inside, usually the highest value single item on a run.

How we buy breaker plugs →

Scrap Bus Duct & Plugs

Burned, crushed and water damaged material priced honestly on recovery value.

How we buy scrap grade →

Feeder Busway

Solid feeder runs without plug openings, sold on conductor rating and length.

How we buy feeder busway →

Quote a Rice Lake Lot

Send photos of the plugs and receive a firm number, usually the same day.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

How the Sale Works

Four steps, none of which cost you anything

  1. Send What You Have

    A photograph of the nameplate and one wide shot of the run or the pallet is enough to begin. If the nameplate is gone, photograph whatever is written on the cover and we will identify it.

  2. Receive a Firm Offer

    We respond with a committed cash figure, usually the same day. It is an offer rather than an estimate, and it does not move afterward.

  3. Schedule on Your Terms

    Removal in Rice Lake is arranged around your shutdown window, demolition sequence or production schedule. If a contractor badge or safety orientation is required, we work through it.

  4. We Pay, Then We Cut It Out

    Payment is completed before anything moves. Our crew pulls the plugs, takes the duct off the hangers, crates it and hauls it away on our own freight.

A pile of fusible bus plugs with operating handles on a shop floor — bought in Rice Lake, WI
A shop floor of fusible plugs waiting on pickup, handles and covers still on them.

Selling Bus Plugs in Rice Lake: Common Questions

Straight answers

Do you send a crew to Rice Lake to take the run down?

Yes, and that is the core of what we do. We stage trucks and lift equipment near Milwaukee and dispatch into Rice Lake as projects are scheduled. You are not hiring riggers, renting a lift or arranging a freight carrier.

Do I need to test or certify the equipment first?

No. We never ask a seller to test, megger or certify anything. We grade from physical condition and the nameplate, working from your photos first and our own inspection on site afterward.

What if the plugs are old or the busway line is discontinued?

That usually works in your favor. A plant running a line that went out of production cannot buy new plugs at any price, so obsolete units are among the most valuable material we handle.

When do I get paid?

Before the equipment leaves your property. Payment is not contingent on us reselling it afterward, and we do not work on consignment.

Will you buy a few plugs in Rice Lake, or only whole runs?

Both. A pallet of plugs is worth a call, and if you are decommissioning a facility we will quote the entire electrical scope as one purchase and schedule around your demolition date.

Do you buy the rest of the gear in the electrical room?

Yes. Panelboards, switchboards, safety switches, starters, MCC buckets and dry type transformers are bought in the same transaction, which means one crew, one date and one payment.

Have Bus Plugs or Busway in Rice Lake to Sell?

Call or text photos of the equipment and we will return a firm offer, usually the same day.

Call or text 954-740-1983

Request Your Quote

Tell us what is on the pallet in Rice Lake and we will handle the rest.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

Call 954-740-1983