We do the dismantling. Paid upfront, freight on us, and we never ask you to test anything.
Electrical Bus Plug Buyers logo Electrical Bus Plug BuyersWe cut it out, crate it and pay upfront
  1. Home
  2. Locations
  3. Michigan
  4. Troy

Troy, MI · the Great Lakes

Bus Duct Buyers Covering Troy, MI

We cut it out, crate it and haul it away. You are paid before the truck leaves.

  • Paid before removal
  • No testing required
  • Dismantling and rigging on us
  • Freight always covered
A pile of fusible bus plugs with operating handles on a shop floor
50States Covered
30A - 5000ARatings Purchased
Same DayTypical Offer Turnaround
$0Cost to the Seller

Request a Quote

We buy bus plugs, busway and bus duct in Troy, MI and throughout Michigan. There is no obligation.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

Why Sellers Choose Us

What a Troy teardown involves on your end

01You Are Paid Before It Moves

Funds change hands before a single section leaves your property. There is no consignment and no waiting on a downstream resale.

02We Do The Dismantling

Our own crew takes the run down. You are not sourcing riggers, renting lifts or chasing a carrier who has never handled busway before.

03No Testing, Ever

You are never asked to test, megger or certify anything. We grade from physical condition and the nameplate. That is the entire process.

04Mixed Lots Are Welcome

Fusible plugs, breaker units, bus duct, tap boxes, panelboards and starters all on one job is the normal case rather than the exception.

The Troy Market

If a Troy facility is being decommissioned, we will quote the whole electrical scope and clear the room on your schedule. We run the Great Lakes jobs continuously, which is why Troy, MI rarely waits long for a crew. No testing is required, ever. We grade from physical condition and nameplates, and we accept the lot as it stands.

Every rating and every manufacturer is in scope. What we see most often in Troy is an entire overhead run with elbows, tees and end closures and fire damaged sections priced honestly on recovery value. Across Michigan we also buy panelboards and safety switches from the same electrical room, aluminum feeder busway from a service entrance run and Bulldog and Federal Pacific plugs out of an older facility.

Who We Buy From

Our sellers here are typically hospital and university plant operations groups, steel mills and metal fabrication shops, warehouse and distribution center owners. We also buy from school district and municipal facilities departments and electrical contractors closing out a retrofit.

The triggers we hear most often are straightforward:

  • The busway line is discontinued, so the spares on the shelf will never be installed here again.
  • Maintenance stocked spare plugs for a system that has since been removed entirely.
  • Insurance replaced a fire damaged run and the displaced material has to move off site.
  • The plant is closing and every asset is being liquidated on a deadline.

Removal and Freight in Troy

Because we haul our own freight out of Detroit, we do not have to shave the offer to cover a third-party carrier. If the run is thirty feet up over live equipment, tell us and we will plan the lift accordingly.

The equipment is valued on its own merits. The cost of getting it out of Troy — the crew, the lifts, the rigging and the freight — is absorbed on our side. Sellers who already hold a scrap quote often find the difference substantial, because a scrap figure pays metal weight minus processing and ignores entirely what a working plug is worth to a plant that cannot buy a new one.

What Comes Out of Michigan Facilities

Fusible Bus Plugs

The bread and butter of the trade: fused plug-in units from 30 amp through 800 amp, handle and interlock intact.

How we buy fusible plugs →

Plant Closures & Teardowns

Whole-facility electrical removal on a demolition schedule, from the busway down to the last disconnect.

How we buy plant closures →

Bus Duct & Busway Runs

Straight lengths, elbows, tees, end boxes and the whole overhead run, cut out and removed by our own crew.

How we buy bus duct runs →

Tap Boxes & Fusible Switches

Cable tap boxes, fused switch units and transition boxes that terminate a run into conduit or gear.

How we buy tap boxes →

Quote a Troy Lot

Send photos of the plugs and receive a firm number, usually the same day.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

How the Sale Works

Four steps, none of which cost you anything

  1. Send What You Have

    A photograph of the nameplate and one wide shot of the run or the pallet is enough to begin. If the nameplate is gone, photograph whatever is written on the cover and we will identify it.

  2. Receive a Firm Offer

    We respond with a committed cash figure, usually the same day. It is an offer rather than an estimate, and it does not move afterward.

  3. Schedule on Your Terms

    Removal in Troy is arranged around your shutdown window, demolition sequence or production schedule. If a contractor badge or safety orientation is required, we work through it.

  4. We Pay, Then We Cut It Out

    Payment is completed before anything moves. Our crew pulls the plugs, takes the duct off the hangers, crates it and hauls it away on our own freight.

A box truck packed with bus plugs marked by amp rating and voltage — bought in Troy, MI
Loaded tight in a box truck straight off a plant teardown.

Selling Bus Plugs in Troy: Common Questions

Straight answers

Do you send a crew to Troy to take the run down?

Yes, and that is the core of what we do. Because we haul our own freight out of Detroit, we do not have to shave the offer to cover a third-party carrier. You are not hiring riggers, renting a lift or arranging a freight carrier.

Do I need to test or certify the equipment first?

No. We never ask a seller to test, megger or certify anything. We grade from physical condition and the nameplate, working from your photos first and our own inspection on site afterward.

What if the plugs are old or the busway line is discontinued?

That usually works in your favor. A plant running a line that went out of production cannot buy new plugs at any price, so obsolete units are among the most valuable material we handle.

When do I get paid?

Before the equipment leaves your property. Payment is not contingent on us reselling it afterward, and we do not work on consignment.

Will you buy a few plugs in Troy, or only whole runs?

Both. A pallet of plugs is worth a call, and if you are decommissioning a facility we will quote the entire electrical scope as one purchase and schedule around your demolition date.

Do you buy the rest of the gear in the electrical room?

Yes. Panelboards, switchboards, safety switches, starters, MCC buckets and dry type transformers are bought in the same transaction, which means one crew, one date and one payment.

Have Bus Plugs or Busway in Troy to Sell?

Call or text photos of the equipment and we will return a firm offer, usually the same day.

Call or text 954-740-1983

Request Your Quote

Tell us what is on the pallet in Troy and we will handle the rest.

Or call 954-740-1983. A couple of photos and a nameplate shot get you the fastest, firmest number — text or email them anytime. We never ask you to test or certify anything.

Call 954-740-1983